Description
Downloads
User Manual
Declaration of Conformity (DoC)
Specification
Manufacturers Page
Detailed description
- The PX787 is a DMX-512 control signal converter to a DALI channel. This DMX / DALI converter is a new development that makes it possible to combine the two control systems in a simple way. With the PX787, you can connect fixtures that work with the DALI protocol to all controllers that send a DMX512 signal. The unit is equipped with two DMX connections (In/Out) and one DALI connection to which up to 64 DALI devices can be connected. The converter also supports four digital inputs through which you can perform actions such as: Switch on/off, set the scene or adjust the brightness (from serial number: 21030041).
- Searching for DALI devices
- Change of parameters in the ballast (e.g.: brightness, address, “fade time”, “fade rate”, etc.).
- Change conversion settings from DMX to DALI
- Change of network settings of the converter
- Firmware update
Managing the PX787 settings is possible from any PC using push buttons via the internal display or via a built-in web server. Changing the settings includes:
In addition, the RDM protocol has been implemented in the PX787.PX787 is housed in an enclosure suitable for mounting on a 35 mm DIN rail and is supplied with a safe voltage of 12 – 24 V DC. Please note that the DALI bus must be supplied with voltage via an external power supply.
Physically
– Plastic housing for DIN rail mounting
– Color/Finish grey
– Dimensions | W: 70mm | H: 86mm | D: 60mm
– Weight 0,15 kg
Electrically
– electrical protection class Safety Extra Low Voltage, SELV
– Operating voltage 12-24VDC via external DIN-PSU
– Power consumption 1W
Power connector input
Terminal Block 2pin
Control
– Protocol DMX, RDM
– Protocol Output DMX, RDM, DALI
Inout
Terminal Block 3pin
Output
Klemmleiste 3pol
Klemmleiste 4pol (DALI-Signal und DALI-Power)
Amount of Universes 1 (512 DMX-Channels)
Trigger
04 Floating contacts for external control
