Description
Downloads
User Manual
Technical Information
Declaration of Conformity (DoC)
Maintaining Tips
PPE Inspection Procedure
PPE-Checklist
Firmware
Product Overview
Manufacturers Page
- The ASAP LOCK fall arrester is designed to facilitate handling for the user when ascending the rope. In normal use, the device automatically follows the user’s movements on the rope without manual intervention. In the event of a fall or abrupt acceleration, the fall arrester locks onto the rope and stops the user. The integrated blocking function allows the user to stop the device to reduce the height of the fall. The connecting arm protects against the loss of the device when passing intermediate belays.
The ASAP LOCK is used in conjunction with an ASAP’SORBER or ASAP’SORBER AXESS fall arrest device to work away from the rope.
Features
- Permanent protection against falls:
- Works on vertical or inclined ropes.
- Blocks on the rope even if the user reaches for the device during the fall.
- The fall arrest device’s built-in blocking function allows the user to stop the device to reduce the height of the fall. In high winds, this feature also prevents the rope from being pulled upward.
- Slides up and down the rope without manual intervention.
- Attaches and detaches easily anywhere on the rope.
- Connecting arm protects against loss of the device when passing intermediate belays.
- Used with a fall arrester (ASAP’SORBER- or ASAP’SORBER AXESS) to work away from the rope. The fall arrester allows the use of the device when rescuing two people with a load of up to 250 kg.
– Blocks in case of falls, slips and uncontrolled rappels.
Simple and efficient:
Physically
– Nominal capacity WLL 250 kg
– Aluminum, stainless steel, nylon
– Color/Finish orange
– Weight 0,425 kg
